Skip to content
📞 1300 987 789 | sales@petroindustrial.com.au
📞 1300 987 789 | sales@petroindustrial.com.au
Diesel and Adblue Storage and Re-fuelling station with FMS from PETRO Industrial

High-Tech Diesel & Adblue Re-Fuelling Storage and Dispensing

The Project:

PETRO installed two 110,000L Self Bunded PT Diesel Tanks plus a 20,000L Adblue Self Bunded Tank, with our iPETRO fuel management system, under these pre-constructed canopies.

Bulk Diesel and Adblue Storage & Dispensing by PETRO Industrial

The Adblue Tank was installed in between the two diesel tanks with 3 dual dispensing points on each side (6 in total). All the pipe work from tank to tank were custom designed, manufactured and installed by PETRO Industrial.

The diesel tanks have 3" Road Tanker Unloading Kits.

Each Diesel Tank has two submersible pumps (4 in total) pumping at over a 100lpm flow rate (as required) to the Compac Dispensers. The Adblue Tank has two submersible pumps as well but with a low flow rate.

The hoses and nozzles were installed on high masts for easy use and longevity of the hoses.

PETRO Industrial electrical installations

All electrical work was designed and installed by our highly qualified hazardous zone certified installation team. With Colibri tank gauging equipment connected to the iPETRO FMS, all dispensing volumes and low levels can be monitored on-line and in real time from anywhere in the world.

The electrical Control Board is also designed in accordance to the rules and regulations, by PETRO, with an emergency stop.

Previous article At PETRO we Stock, Sell and Install Replacement Parts
Next article 2,000L Solar Powered Cube Diesel Trailer

More case studies

  • iPETRO Link VMI
    June 17, 2025

    iPETRO Link Gateway with VMI Integration at Brisbane Airport

    The iPETRO Link Gateway is the ultimate bridge between your fuel storage and dispensing systems and the powerful iPETRO VMI Cloud dashboard. Engineered for seamless integration and total visibility, this device consolidates data from any Fluid Management or Automatic Tank Gauging (ATG) system—no matter how remote or distributed your sites are.

    Read now
  • This project is for a client that needs to transfer diesel and oil to an underground dispensing point 100m away.
    March 24, 2025

    Optimised Fuel and Oil Transfer Solution in Central Queensland.

    PETRO Industrial supplied and installed two Dual Compartment PETRO LT68 Tanks, designed to facilitate the storage and transfer of both diesel and oil. The entire system was pre-engineered in-house, allowing for rapid on-site installation and integration with the client's existing underground pipework.

    Read now