Skip to content
ELAFLEX Flanged Rubber Expansion Joint - ANSI 150# Range

ELAFLEX Flanged Rubber Expansion Joint - ANSI 150# Range

Rubber expansion joints / compensators are used as flexible connectors within pipe systems. Rubber expansion joints are single sphere type rubber expansion joints within swiveling metal flanges. The high quality bellows are produced in a mould. They are used to absorb tensions caused by temperature...

$902

incl GST

SKU: ERV-G150.ASA150

Size

Description

Rubber expansion joints / compensators are used as flexible connectors within pipe systems. Rubber expansion joints are single sphere type rubber expansion joints within swiveling metal flanges. The high quality bellows are produced in a mould. They are used to absorb tensions caused by temperature changes (thermal expansion), and equalize structural settling such as basement subsiding or ground movements.

Recommended for Hydro-carbon products with less than 50% aromatics.

FEATURES:

  • Suitable as a pipe insert / expansion piece to facilitate inspections of valves or other devices.
  • Perfect noise dampeners and ideally qualified to reduce vibrations. The major part of the piping’s structure-borne noise and the low-frequency noise generated by fluids is eliminated.
  • In fluid handling systems it is often necessary to make allowance for pipework expansion, vibration and slight misalignment.
  • A multi-purpose solution to many of these problems is the Elaflex rubber expansion joint.
  • It compensates for stresses arising from these thermal variations or misalignment, substantially dampening vibration from associated plant such as pumps, compressors, etc. preventing the transmission of objectionable noises.
  • Available in a variety of synthetic rubber qualities and flange configurations, it has colour strips for identification to differentiate all commonly used fluids.
  • If required, PTFE liners can be installed for aggressive chemicals.
  • Ancillary fittings include limiting stirrups for use with standard flanges, limit rods and custom-built flanges, flame protection covers, internal support rings for vacuum duty.
  • Rubber expansion joints have been proved in service for many years and are approved by a number of Authorities.
  • PETRO stocks the TW YELLOW range which is commonly used on aircraft refuelling units (see below for related data) – 80 & 100mm.

Tube: Seamless Nitrile NBR., oil resistant for temperatures up to + 100ºC

Cover: Neoprene, electrical-conductive, oil resistant and weatherproof.

Flanges: Forged aluminium Flanged ANSI 150#.

Electrical Resistance: EBetween 1k Ohms and 1Meg Ohms.

Max. Working Pressure: 10 Bar.

Test Pressure: 16 Bar.

Internationally Certified Products & Processes